Products

3-Position Ignition Switch - OFF/Ignition-Accessory/StartMarine-grade battery ignition and start switch suitable for harsh environments on land or sea.Features: Coded tumbler lock, includes two keys Nominal voltage is 12V DC Rated for ignition: 10A at 12V DC and start: 5A at 12V DC #8-32 screw...

3-Position Nylon Ignition Switch - OFF/Ignition/StartImpact and corrosion-resistant switch fits standard 7/8" diameter hole and includes PVC boot for added weather protection.Features: Coded tumbler lock for added secutiry, includes two keys Nominal voltage is 6-36V DC Rated for 15A ignition, 5A start #8-32 screw...

3-Position Sealed Nylon Ignition Switch - OFF/Ignition & Accessory/Ignition & StartSealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259 for ignition switches.Features:...

3-Position SPDT Push-Pull Switch - OFF/ON1/ON1 & 2Single pole, double throw switch turns on position 1 or position 1 and 2.Features: Heavy-duty, noncorrosive construction with moisture-repellent insulators Brass case, stem, terminals and mounting hardware All knobs are screw-on type Nominal voltage is 6-36V DC....

4-Position Brass Ignition Switch - Accessory/OFF/Ignition & Accessory/StartMarine-grade battery ignition and start switch suitable for harsh environments on land or sea.Features: Coded tumbler lock, includes two keys Nominal voltage is 12V DC Rated for accessory: 10A at 12V DC, ignition: 5A at 12V DC,...

4-Position Sealed Nylon Ignition Switch - Accessory/OFF/Ignition & Accessory/StartSealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259 for ignition switches.Features: Nominal voltage...

65A PVC Coated Continuous Duty SolenoidRemotely switch high amperage loads with a low amperage on-off switch.Features: Continuous duty, 65A at 12V DC Intermittent rating 100A: 10 seconds Copper #10-32 thread signal terminals Copper 5/16”-24 thread contact terminals PVC coated steel case Bracket mounting holes...

85A Remote Switching Continuous Duty SolenoidCan be used with Electro-Scan MSDs and other high-amp circuits with remote operation.Features: Continuous duty, 85A at 12V DC Intermittent rating 750A make/100A break, 10 seconds On, 30 minutes Off Insulated ground Steel housing, brass hardware UL listed and...

ATC Six Way Bus Bar with 5mm Input StudThe ATC Negative Bus uses the BEP Contour lock system to allow it to be joined to the ATC fuse holder. This keeps wiring tidy and conveniently located. Current Rating: 100Amps.WARNING: This product can expose you...

Battery Distribution Cluster f/Triple Outboard Engine w/Four Battery BanksBattery Dist Cluster Triple EngineThe 719-140A-DVSR was designed through popular demand for our 717-140A-DVSR cluster. This system is designed for triple outboard installations. Once again using multiple VSR's off each start battery giving combined charge from...

Twin Outboard Engine, Three Battery Banks w/Motorized VSRThe VSR and Emergency parallel switch are combined into one voltage-sensitive switch, and that switch is able to be remote-operated. The layout allows all cables to be attached from the bottom of the cluster.Offers the same features...

Battery Distribution Cluster f/Twin Outboard Engine w/Three Battery Banks The 717-140A-DVSR is designed for twin engine installations. It allows the port engine to charge both the port start battery and the house battery when the port VSR is engaged. It also allows the starboard...

Battery Management Contour Connect Panel for Twin Engine with VSR'sThe CC-803N incorporates a version of our very successful dual engine battery switch cluster. The CC-803N is supplied with cables to allow for horizontal or vertical configurations. The components can also be easily removed and...

701 Contour Battery Master SwitchLabel Set (12 Labels) for non-standard labeling.

Black SPST Momentary Contact Switch - OFF/(ON)Single pole, single throw momentary switch turns one circuit on and off. Compact black push button switch can be used for horn, starter, and other momentary applications.Features: Nominal voltage is 12V/24V DC Rated for 5A at 12V DC,...

Circuit Breaker ModuleThe 707 Circuit Breaker Module offers provision for three circuit breakers ideal for medium duty loads, like waste treatment systems and electric toilets. It is designed to separate these loadings from the main DC panel, thus avoiding unnecessary voltage spikes. Contained in...

Connection Cable Bare End - 300 mmThis 300 mm (12") cable simply pushes onto the back of the push button switches and features 0.8 mm² / 18g cables for switch and backlight connections that comply with ISO/ABYC. Other end is stripped wire for easy...

Contour 1100 Series Double Interior Switch - On/Off - BlackThe Contour Interior Switch can be either surface or recess mounted. The interior series is supplied standard with a three terminal on/on switch which can be used for on/off circuits or two-way light installations. For...

Mini Contour Battery Disconnect Switch - 275A ContinuousThis switch offers a number of unique features, the highlight being the Contour Locking System, allowing it to be a stand alone unit, or locked together with other switches. The control knob can be removed by switching...

Contour Matrix Gas Detector with ControlThe Contour Matrix Gas Detectors are the product of continuing research and development which BEP Marine Ltd devotes to their product range. The BEP Detectors use microprocessor control to ensure correct sensor sensitivity. The Detectors have the capability to...