Electrical - Busbars, Connectors & Insulators

Dual PowerPost Connectors Designed for connecting high amp conductors Includes one black and one red insulator WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm....

2303 150AMP Common BusBar 4 x 1/4" Stud TerminalFeatures: Stud design provides direct terminal to bus contact for low resistant connection Stainless steel studs allow high torquing for excellent electrical contact Tin-plated copper bus for maximum conductivity and resistance to corrosion UV 94-VO rated...

Heavy-Duty 4 Stud BusbarBuilt for rugged, high-load environments, this 4-gang heavy-duty stud bus bar handles large cable connections with ease. Ideal for battery systems or inverter setups where durability is critical.The heavy-duty bus bar features corrosion-resistant hardware and a robust design to withstand vibration,...

VPNB2 MANL 2 Position All-In-One Distribution Block with CoverT-Spec designed VPNB2 distribution block to handle the high-current power and ground distribution for two (2) power sources, and protect them each with a mini-ANL fuse.  This hefty little block distributes power from one (1) 1/0-gauge...

2602 Terminal Block 65AMP - 2 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known...

XD Relay Cross-Over Bus BarThe XD Relay Cross-Over Bus Bar allows users to link together Egis XD Single, Dual, and Triple XD Relays to each other in multiple configurations and even to the Egis 8700 Mechanical Disconnect.  Linking relays together creates compact installations and...

Pro Installer Link Joiner 3-WayPro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars...

6 x 5⁄16- 18 Stud TerminalPart# 2126 SpecificationsContinuous Amperage 250 Amperes AC/DCVoltage Rating 300 Volts AC Maximum / 48 Volts DC MaximumBus Material Tin-Plated Copper CDA 110 / UNS 11000Base Material Reinforced PolycarbonateCover Material ABSCE Certified WARNING: This product can expose you to chemicals...

Pro Installer Link Joinder 4-WayThis tin-plated bus bar can be used to link 4 adjacent DC products together.  The rating varies from 450-650 Amps, depending on how this busbar is wired.  Made from tin-plated high-purity copper, this bar is intended for use with the...

2702 DualBus 100AMP Common BusBar 10 x 8-32 Screw TerminalFeatures: Combines negative and positive buses on one block Tin-Plated Copper CDA 110 / UNS 11000 UL 94-V0 Rated, Glass Reinforced Thermoplastics #8-32 Screw 10 per bus Maximum Voltage: 300V AC / 48V DC WARNING:...

Double Insulated Stud 8mmThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry. Saves space...

2709 Cover For DualBus for 2701Specifications: Length: 4-3/16" Height: 7/8" Width: 2-1/2" Weight: 0.03lb WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more...

2723 DualBus Plus 5/16" Stud - 5 x 10 - 32 Screw TerminalFeatures: Combines negative and positive buses on one block Clear polycarbonate cover snaps on to meet Coast Guard and ABYC insulation requirements WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate...

2710 Cover for DualBus 2702Specifications: Length: 6-3/8" Height: 7/8" Width: 2-3/8" Weight: 0.04lb WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information...

4014 CableCap - Red 1.25 to 0.70Features:Insulate stud type connectors on alternators, starters, windlasses and other high amperage devicesWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other...

150 Ampere Common Busbar 20 x 8-32 Screw Terminal with CoverPN:   2312 Stud design provides direct terminal to bus contact for low resistant connection Stainless steel studs and screws allow high torquing for excellent electrical contact Tin-plated copper bus for maximum conductivity and resistance to...

Terminal Feed Through ConnectorsEliminates chage and provides strain relief when passing high current through hulls, decks and bulkheads.Features: Perfect for passing high current cables through hulls, decks and bulkheads Large cables passed through holes are subject to chafing even when protective grommeting is used....

Pro Installer Link Joiner 6-WayThis tin-plated bus bar can be used to link 6 adjacent DC products together.  The rating varies from 350-650 Amps depending on how this busbar is wired, see drawing for details.  Made from tin-plated high-purity copper, this bar is intended...

3/8" Power Post - BlackA rugged single power post with a 3/8” stud, built for high-current cable termination. It’s perfect for distributing power from batteries, breakers, or busbars in demanding environments. This 3/8 power post features corrosion-resistant materials to ensure long-lasting durability even in...

VDB4 4-Position Distribution Block with CoverT-Spec designed their VDB4 distribution block to handle the high-current power distribution for four (4) power sources while keeping your wiring connected securely and looking neat.   You can also use this hefty little block to combine the ground...