Sidebar

Categories

Availability

Brand

Price

$
to
$

Boat Outfitting - Tools

Stock up on essential tools for maintenance, repairs, and emergencies, designed specifically for marine use.

Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Sea-Dog Stainless Steel Bottle Opener w/Brushed Finish [588450-1]
    Sea-Dog
    Sea-Dog Stainless Steel Bottle Opener w/Brushed Finish [588450-1]
    Stainless Steel Bottle Opener with Brushed Finish Corrosion resistant investment cast 316 stainless steel bottle opener wall mounts with two #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects...
    $21.99
    $28.95
    $21.99
  • Weld Mount 1.5" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Threads - Qty. 15 [83224]
    Weld Mount
    Weld Mount 1.5" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Threads - Qty. 15 [83224]
    1.5" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide...
    $33.99
    $0.00
    $33.99
  • GROCO Thru-Hull Installation Tool [THT-530]
    GROCO
    GROCO Thru-Hull Installation Tool [THT-530]
    Thru-Hull Installation Tool Thru Hull Installation ToolThe Concept:THT-530 makes the installation of standard GROCO thru-hull fittings possible by a single installer.  Slide the thru-hull fitting, flanged end first, over the tool.  (It will stop at the proper step.)  Tie a length of monofilament to the...
    $151.99
    $210.00
    $151.99
  • Sea-Dog Add-A-Snap - White - 1-1/2" [299201W-1]
    Sea-Dog
    Sea-Dog Add-A-Snap - White - 1-1/2" [299201W-1]
    Add-A-Snap - White - 1-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State...
    $5.95
    $5.95
  • Weld Mount AT-3B Small Black Nylon Wire Tie Mount - Qty. 50 [803950B]
    Weld Mount
    Weld Mount AT-3B Small Black Nylon Wire Tie Mount - Qty. 50 [803950B]
    Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50...
    $28.99
    $33.99
    $28.99
  • GROCO Spanner Wrench/Deck Plate Key [SW-2531]
    GROCO
    GROCO Spanner Wrench/Deck Plate Key [SW-2531]
    Spanner Wrench/Deck Plate Key Features:Cast bronze with stainless steel pins to fit 1/4" and 5/16" holes.  Opens to service deck plates or strainer caps with key holes up to 7" apart.  Hangs conveniently near the strainer(s) location.   C83600 bronze
    $24.99
    $24.99
  • Attwood Prop Wrench Set - Fits 17/32" to 1-1/4" Prop Nuts [11370-7]
    Attwood Marine
    Attwood Prop Wrench Set - Fits 17/32" to 1-1/4" Prop Nuts [11370-7]
    Prop Wrench Set - Fits 17/32" to 1-1/4" Prop NutsMultiple socket sizes for all prop maintenance. Offers multiple sockets to fit from 17/32" to 1-1/4", allowing consumers to service multiple props Built of durable plastic WARNING: This product can expose you to chemicals which...
    $18.99
    $19.99
    $18.99
  • Weld Mount 1" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83216]
    Weld Mount
    Weld Mount 1" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83216]
    1" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide...
    $30.99
    $30.99
  • Weld Mount AT-3 Small White Nylon Tie Mount - Qty. 500 [803500]
    Weld Mount
    Weld Mount AT-3 Small White Nylon Tie Mount - Qty. 500 [803500]
    AT-3 Small White Nylon Tie Mount - Qty. 500The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull...
    $245.99
    $245.99
  • Weld Mount 1.25" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83220]
    Weld Mount
    Weld Mount 1.25" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83220]
    1.25" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide...
    $32.99
    $32.99
  • Weld Mount 1" Tall Stainless Stud w/1/4" x 20 Threads - Qty. 10 [142016]
    Weld Mount
    Weld Mount 1" Tall Stainless Stud w/1/4" x 20 Threads - Qty. 10 [142016]
    1" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4" x 20 threads. Use for hanging panels,...
    $35.99
    $35.99
  • Weld Mount AT-5 Large White Nylon Tie Mount - Qty. 500 [805500]
    Weld Mount
    Weld Mount AT-5 Large White Nylon Tie Mount - Qty. 500 [805500]
    AT-5 Large White Nylon Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength...
    $298.99
    $298.99
  • Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 500 [805500B]
    Weld Mount
    Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 500 [805500B]
    AT-5B Large Black Nylon Wire Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull...
    $298.99
    $298.99
  • Weld Mount 1.5" Tall Stainless Steel Stud w/#10 x 24 Threads - Qty. 10 [102424]
    Weld Mount
    Weld Mount 1.5" Tall Stainless Steel Stud w/#10 x 24 Threads - Qty. 10 [102424]
    1.5" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter....
    $36.99
    $36.99
  • Weld Mount AT-651 Mixing Tips f/Use w/AT-6031 Adhesive - Qty. 10 [85001575]
    Weld Mount
    Weld Mount AT-651 Mixing Tips f/Use w/AT-6031 Adhesive - Qty. 10 [85001575]
    AT-651 Mixing Tips for Use with AT-6031 Adhesive - Qty. 10Weld Mount’s AT-651 mixing tip is designed specifically for use with Weld Mount’s AT-6031 adhesive. AT-6031 is a 10 to 1 adhesive that requires a mixing tip with more mixing chambers to ensure proper...
    $18.99
    $18.99
  • Weld Mount AT-7 Aluminum Base Swivel Tie Mount - Qty. 25 [80725]
    Weld Mount
    Weld Mount AT-7 Aluminum Base Swivel Tie Mount - Qty. 25 [80725]
    Aluminum Base Wire Tie MountThis tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees making alignment with the wire harness easier. This tie mount is designed for...
    $54.99
    $54.99
  • Weld Mount AT-113 Large White Footman's Strap - Qty. 6 [80113]
    Weld Mount
    Weld Mount AT-113 Large White Footman's Strap - Qty. 6 [80113]
    Footman's Strap MountThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3" max strap width. This strap is incredibly strong, paintable, and is rated for over...
    $21.99
    $22.99
    $21.99
  • Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 50 [805950B]
    Weld Mount
    Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 50 [805950B]
    Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's...
    $32.99
    $32.99
  • Weld Mount AT-9 Aluminum Wire Tie Mount - Qty. 25 [809025]
    Weld Mount
    Weld Mount AT-9 Aluminum Wire Tie Mount - Qty. 25 [809025]
    Aluminum Wire TieUsed with Stainless Steel or Nylon wire ties up to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to welding or drilling and tapping...
    $38.99
    $38.99
  • Sea-Dog Rigging Knife - 304 Stainless Steel [565050-1]
    Sea-Dog
    Sea-Dog Rigging Knife - 304 Stainless Steel [565050-1]
    Rigging Knife - 304 Stainless SteelThis handy Rigging Knife includes a sharp blade, Marlin spike, shackle key, screw driver, bottle opener, and a loop to attach a lanyard (not included). Constructed of corrosion resistant 304 stainless steel. A great addition to any tool box....
    $30.99
    $36.15
    $30.99

Recently Viewed Products